Announcement

Collapse
No announcement yet.

Terrybullwon's Racing S2 coupe

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Not quite yet

    Been hammering out the 80, Should be done by the end of march.
    Using some old super touring car suspension. Just having the dampers serviced and dyno'd now and a new set of springs made to match the corner weights and ride height. Jay at DMD is doing a stella job of making some clamps to locate the standard hub. As the touring car item is far to low.

    Exhaust was testing 4" oval












    Last edited by terrybullwon; 10 February 2016, 22:56.
    Chef

    Comment


    • now that's a big exhaust chef!
      what turbo is that? power goal?
      audi coupe quattro b2 2.2 20vt project (573hp-626nm)
      TWINCHARGED power,zero lag
      AEM W/M injection

      Comment


      • Originally posted by quattro-nick View Post
        now that's a big exhaust chef!
        what turbo is that? power goal?
        Yep!

        Its a Garrett Gt35 should be good for 550hp on petrol and more race fuel with out throwing loads of boost at it
        Chef

        Comment


        • Tatech?
          Panthero Coupé quattro 20vt
          Indigo ABY coupé
          Imola B6 S4 Avant

          Comment


          • Originally posted by Error404 View Post
            Tatech?
            Yep, Hence the funny pin out i asked for on your harness

            Another little task, make the sub frame fit the 4" down pipe, seem weld and solid mount

            Chef

            Comment


            • Incoming...... socks arrived today. Are we waiting on anything else, Chef??

              Sent from my SCH-I545 using Tapatalk

              Comment


              • Regarding the bolts on the turbo are loosening,have you tested Nord-Lock washers?

                Comment


                • Originally posted by S2_Rennfahr View Post
                  Regarding the bolts on the turbo are loosening,have you tested Nord-Lock washers?
                  I use these, the only lock washers that work, quite expensive here in the UK though.
                  sigpic
                  1991 Audi S2 3B - 2.5 Stroker engine
                  1997 A6 2.5TDi quattro avant - C4
                  1976 RD250E / 350LC cafe racer

                  Comment


                  • I use these on the manifold and turbo, can't fault them.

                    http://www.westfieldfasteners.co.uk/...FQoHwwodnqUNjw
                    The ONLY S2 Golf!
                    http://www.s2forum.com/forum/showthread.php?t=19402
                    10.42@138mph
                    https://m.youtube.com/watch?v=0wnkkOfFpXg

                    Comment


                    • Originally posted by AndyP View Post
                      I use these, the only lock washers that work, quite expensive here in the UK though.
                      Yeah, I prefer these washers.These are used a lot in the ship industry here in Norway. I could send some over!

                      Comment


                      • Originally posted by gnutz2 View Post
                        I use these on the manifold and turbo, can't fault them.

                        http://www.westfieldfasteners.co.uk/...FQoHwwodnqUNjw
                        I use aerotight too. Haven't had one come loose yet

                        Not too expensive either and readily available from eBay UK sellers.

                        http://www.ebay.co.uk/sch/sis.html?_...72.m2749.l2658
                        91 Modded 3B
                        14 A6 Avant Black Edition

                        Comment


                        • Thanks guys i found some titanium bolts and nuts, that i can lock wire on.

                          I have also brought a spare set of bolts like Aaron linked in.
                          And a BIG thanks to him for sending my next lot of shinny parts over the pond.
                          Chef

                          Comment


                          • Haha, have fun drilling the Ti bolts

                            Where did you find those super touring bits mate?
                            Panthero Coupé quattro 20vt
                            Indigo ABY coupé
                            Imola B6 S4 Avant

                            Comment


                            • Originally posted by Error404 View Post
                              Haha, have fun drilling the Ti bolts

                              Where did you find those super touring bits mate?
                              Pre drilled couldn't afford the drill bits.

                              A friend want a set ? I have spares
                              Chef

                              Comment


                              • Just curious mate, TBH I couldn't afford them
                                Panthero Coupé quattro 20vt
                                Indigo ABY coupé
                                Imola B6 S4 Avant

                                Comment

                                Working...
                                X