Large IC install/pluming

[Lupo911]

Price?

depense what do you need...

Crossmember is 300 Euro
Intercooler 450 Euro

[Lupo911]

Crossmember SS304

[s2_bo]

Bry, this one here is similar

[Lupo911]

Silicon Tubes for Intercooler - Short Intake Manifold and Water Hose for Main Watercooler and 2nd Watercooler

[Lupo911]

Bry, this one here is similar

nope... my Intercooler is made for the Audi S2, thats not an Universal IC like the ones from Ebay. This is a bolt on Solution, if you dont want to weld or cut anything on your car. The Core Size is 500x220x90.

[smogthemog]

Problem is, it is a very expensive solution unlike the original fit on this thread by Bo and mine over in Audifans (S6).
Yours is very nice and looks easy to fit, and is as neat as hell but a very understanding bank manager is needed

[smogthemog]

There is also This chap to consider also. http://stores.ebay.co.uk/Universal-I...enameZL2QQtZkm

I bought my intercooler off of him and he was VERY helpful indeed.
I used the 'large' sized one he does.
See My thread here: http://www.audifans.net/modules.php?...wtopic&t=15234

[newsh]

Crossmember on the way, thanks Bo! 600x300x76 IC ordered and a DIY pipe kit in 76mm too, seems like I've taken the plunge! Hope its all the right size!
Bo, your IC was 76mm in and out yes? There's something in the thread that contradicts this..

[s2_bo]

Hmm, good question, I think it was. but will have to check for you.

It was defo same in as out but im not 100% sure on the diameter. Ill have to see if i can find the IC again on ebay.

Cheers.
Bo

[Azman]

MX tuning on the bay is a good intercooler place too

Think they all sell the same stuff though (made by the same peeps from the look of them all)

[smogthemog]

Hi Azman.

In your sig you mention you have 'chopped' your manifold?

What exactly did you do to it mate as I would be interested to know in respect to doing it to mine?
Thanks

Jim

[Acidburn]

IIRC bo yours was the 63mm inlet and outlet, i've seen the 76mm one's on the bay and will have to go for that as from what i've heard the guy cannot get the 63mm one's anymore, just have to use some spacers or a pair of mark h mods to take up the difference.

[Azman]

@ smog - Right then, slice off round the back plate of the IM (the part that the TB mounts to) using a very thing grinding disc, cut a square out and work from there taking off as little as possible.. there is a thread on here somewhere I will have a look for, I used it a s a guide and then got it all welded with some crossbars to prevent the rplacement plate from buckling under boost and cracking the welds again!!!!

[Azman]

http://www.s2forum.com/forum/showthread.php?t=4136

[s2_bo]

Can we keep this thread on topic please.

Jim any questions aimed directly at someone can be sent by PM.

Thank you..

Bo