Yeh just a circular type fitting with a sponge in it just prise it out with a small screwdriver and wash it in the sink, I'll try find a pic
Announcement
Collapse
No announcement yet.
New S2 Avant Nothelle N300 owner
Collapse
X
-
Carbon canister was mucky
I wanted to try reverse bleeding the slave cylinder.
You can’t get a ring spanner in the space. So, I did some inventing.
I think it’s worked. Pedal now comes back nicely but I haven’t checked the bite point yet.
It was a cheap chainsaw spanner (I think). The hole inside was big enough to take the hose. I welded an old 11mm socket on the end, then drilled the socket end out to 10mm, so the hose fitted. Getting it all on the bleed nipple was fun!
Sorry the pic isn't very clear!
Sent from my iPhone using TapatalkLast edited by Tractor Dave; 2 January 2019, 19:40.Nothelle S2 Avant
Black Ur project
Ocianic Ur project gone
S2 Coupe project gone
Urs6 plus project gone
Comment
-
e7dfbecd65b8cfaac28b15e244f6e717.jpg
Great to see the car on it's wheels a landmark moment!
The Audi front wing badges your looking for are nla but i've seen them somewhere for i think £50 new just can't think where atm. You can try second hand ones on ebay 8A0 853 621 or you could try Audi for the A4 B5 ones these were still available a couple years ago, they look identical except the rear fixing is different 8D0 853 621 B, just use sikaflex.96 URS6 plus speck saloon
96 URS6 plus speck estate
94 2.6 80 Avant
99 2.8 final edition Cabriolet
Comment
-
Thanks to Ajax1976 for these
I also found the small trims for the front wings on Audi Tradition. A bit of a shock at e16.00 each! Order with Colsey. When they arrive I will get my boy to copy them on his 3D printer.
I’m still looking for a Gamma radio if anyone has one knocking about.
Sent from my iPhone using TapatalkNothelle S2 Avant
Black Ur project
Ocianic Ur project gone
S2 Coupe project gone
Urs6 plus project gone
Comment
-
Fitted my coil conversion from Alex (Error404).
Top quality stuff he makes, as many have said before.
Very easy fit too!
Only issue I have is the coil pencils won’t stay down on the plug. Anyone had that problem?
Gave the intake pipe a quick re spray while it was off. Sssh, don’t tell the Mrs it’s drying by the fire.
Sent from my iPhone using TapatalkNothelle S2 Avant
Black Ur project
Ocianic Ur project gone
S2 Coupe project gone
Urs6 plus project gone
Comment
-
Those look like a different flavour of coil and may be shorter than those that are normally recommended, as per the old style 1.8T coilpacks. Maybe someone can confirm?
The later versions are longer and those are what you need.Panthero Coupé quattro 20vt
Indigo ABY coupé
Imola B6 S4 Avant
Comment
-
Originally posted by Error404 View PostThose look like a different flavour of coil and may be shorter than those that are normally recommended, as per the old style 1.8T coilpacks. Maybe someone can confirm?
The later versions are longer and those are what you need.Nothelle S2 Avant
Black Ur project
Ocianic Ur project gone
S2 Coupe project gone
Urs6 plus project gone
Comment
-
when I fitted to my 7a cover, I trimmed back all the rubber and fitted o-rings...
Trimming could help, but you need to measure if they will be the right (sufficiently long enough) length to fit properly when clipped to a plug to ensure you're not wasting your time...Honda CBR 1100XX Blackbird Turbo....undergoing major changes.....
S2 Coupe... bit easier off the line...
'03 ZX12-R daily hack.... lots of nice bolt ons...
Comment
-
Originally posted by LHD_Kid View Postwhen I fitted to my 7a cover, I trimmed back all the rubber and fitted o-rings...
Trimming could help, but you need to measure if they will be the right (sufficiently long enough) length to fit properly when clipped to a plug to ensure you're not wasting your time...Nothelle S2 Avant
Black Ur project
Ocianic Ur project gone
S2 Coupe project gone
Urs6 plus project gone
Comment
-
I will measure one of mine Dave
Comment
Comment